It is mandatory for industries to clean machinery parts for enhanced outcomes, protecting the machinery, and meeting the regulatory standards. The common type of cleaning includes removing oil, grease, paint, rust, adhesives, and other coatings from aluminum, copper, steel, brass, etc. There are different cleaners in the market they are used for industrial parts cleaning, but not all of them are environmental-friendly, hazard-free, and cost-effective. ArmaKleen addresses all such challenges with its innovative and specially formulated aqueous-based cleaners. ArmaKleen provides premium aqueous-based cleaners that ensure industrial parts are cleaned effectively and economically.
Products
As industrial parts require different types of cleaning solutions for proper cleaning, ArmaKleen has a diverse aqueous cleaner product range that can address any cleaning requirement. Following are some of the top-notch products of ArmaKleen:
Bio 24
Being a super-concentrated, bio-based, and aqueous parts cleaner, ArmaKleen Bio 24 is effective in cleaning applications related to industrial, automotive, government, and military. Its formulation is based on renewable sources that are biodegradable, non-corrosive, and possess 72% bio-carbon material. It cleans lubricating oils, grease, dirt, and similar soils from copper, brass, aluminum, steel, and other surfaces. It is applicable in ultrasonic, immersion, spray, and manual cleaning applications. It is environmental-friendly, non-flammable, and safe for the workers.
4 in 1 Cleaner
As the name implies, ArmaKleen 4 in 1 Cleaner is a cleaner with multiple applications. It gives effective cleaning performance in a diverse temperature range. It is applicable in ultrasonic, immersion, spray, and manual industrial parts cleaning applications. It can clean copper, brass, aluminum, and steel simultaneously. It also provides protection from indoor rust for a short duration. Besides that, it is a super-concentrated, low foaming, non-flammable, and NSF approved product.
M-100 BCR
A caustic free and specially formulated, low-pH ArmaKleen M-100 BCR cleaner is designed to safely remove baked on carbon and other heavy soils. Other than effectively cleaning parts, its formulation makes aluminum look bright and new. Like 4 in 1 Cleaner, it also provides protection from indoor rust for a short duration demanding on the environmental storage conditions. It is applicable in ultrasonic, immersion, and spray cleaning applications.
M-HP-2
Compared to all the exceptional products of ArmaKleen, M-HP-2 is the lowest-forming spray product that is effective in high-pressure spray applications. It gives superior performance when used in high-pressure cabinet washers where the spray pressures over 60 psi. It also acts as an oil splitter and can increase cleaner bath life when used with coalescing, oil skimming, and similar other filtration setups. It is safe on copper, brass, aluminum, and steel.
Universal Paint Gun Cleaner
ArmaKleen Universal Paint Gun Cleaner can be readily used to clean solvent-based paints and uncured waterborne in industrial paint finishing and automotive paint shops. It is applicable with spray equipment cleaners with one condition that such cleaners support aqueous-based cleaners. Being a ready-to-use product, it does not require prior heating for effective operation. Besides that, it is non-flammable and fulfills air quality standards.
